Replacing a swing motor on a mini excavator begins with identifying the original unit. For workshops and parts distributors sourcing a 20N-60-46500 swing motor, the machine reference, mounting arrangement and hydraulic connections all belong in the purchasing specification.
The product listing references Komatsu PC10, PC10-6 and PC10-7 excavators, together with 20N-60-46500, 20N-60-46501 and 2-200004HV-E. These references provide a starting point for an enquiry. Their appearance in the same listing does not establish interchangeability across every machine version.
Record the complete excavator model, machine serial number and any identification visible on the removed motor. Photographs should show the nameplate, mounting face, output end and hydraulic connections.
Where the original number differs from the proposed replacement, request confirmation of the applicable replacement relationship. In particular, the similarity between 20N-60-46500 and 20N-60-46501 should not replace a check against the relevant parts information.
Keeping the original markings intact in photographs helps distinguish a confirmed reference from a number copied from another supplier’s listing.
The product photographs show a motor body with a mounting flange and an exposed toothed output end. Both interfaces require dimensional checks before ordering.
For the flange, compare mounting-hole spacing, hole diameter, locating dimensions and the distance from the mounting face to the output end. Overall housing length and available installation space should also be recorded.
For the output interface, confirm tooth count, tooth profile, outside diameter and engagement length. A similar appearance is useful for initial identification, but final matching should use measurements or a dimensional drawing.
Hydraulic connections require their own review. Confirm port quantity, position, thread specification, function and hose orientation against the original installation.
The supplied product information does not state displacement, rated pressure, permissible flow or output speed. Buyers requiring these parameters should request model-specific technical data rather than use general descriptions such as “high torque” as selection criteria.
Any drain connection, brake arrangement or valve configuration should also be confirmed for the actual unit being supplied.
The product images display both a motor assembly and separate shaft components. A quotation should identify whether the order covers the assembled motor, individual repair parts or a package containing additional components.
List each required item, its reference and quantity. Confirm whether separately pictured shafts, installation seals or connection accessories are included.
For repair workshops, distinguishing a complete replacement enquiry from an internal-component repair enquiry gives the supplier a clearer basis for preparing the offer.
The listing states that a machinery test report and outgoing inspection video are provided, with a six-month warranty. Before ordering, confirm which product the documentation covers, what was inspected and which warranty conditions apply.
An inspection video can document appearance, identification and the demonstrated inspection process. Performance requirements involving pressure, speed or leakage should be supported by the corresponding test conditions and results.
A useful enquiry includes the machine model and serial number, original motor reference, photographs, interface measurements, required quantity and delivery destination.
The listed package dimensions are 46 × 25 × 25 cm, with a single gross weight of 26 kg. These figures support shipping estimates; installation dimensions and motor net weight should be confirmed separately.
For enquiries involving 20N-60-46500, 20N-60-46501 or 2-200004HV-E, send the original identification and connection details so the proposed configuration and supply scope can be reviewed before purchase.