banner banner
News Details
Created with Pixso. Home Created with Pixso. News Created with Pixso.

LG240 Final Drive Parts: Matching Part References to Carrier and Sun Gear Configurations

LG240 Final Drive Parts: Matching Part References to Carrier and Sun Gear Configurations

2026-11-09

When sourcing internal final drive parts for a LiuGong LG240 excavator, the machine model, component reference and reduction stage all need to be identified. This is particularly important when an enquiry covers planetary carriers and sun gears for both first- and second-stage assemblies.

The product information uses LG240SP as its listing designation and includes references 22C0247, 40A0057, 71A0328 and 40A0056. These numbers should be matched to the original parts information and the travel reducer currently installed on the machine.

Assign Each Reference to a Specific Component

Several references appearing in one title do not establish interchangeability or confirm that every number identifies a complete carrier assembly.

The supplied information does not explicitly assign 22C0247, 40A0057, 71A0328 and 40A0056 to individual carriers, sun gears or reduction stages. Before ordering, request the component name, diagram position, quantity and assembly condition associated with each required reference.

Where the original marking is unreadable, provide the reducer nameplate, diagram position and removal photographs. LG240SP can support a product enquiry, but it does not replace the original component number or gearbox identification.

Confirm First- and Second-Stage Requirements Separately

The images show carriers with circular and approximately triangular plates, labelled “First Assembly” and “Second Assembly.”

These shapes support initial identification. However, the stage specified in an order should be confirmed against the actual reducer diagram or removal position. Plate shape alone should not determine the stage assignment across every LG240 configuration.

For a repair involving both stages, record the carrier, sun gear and accessory requirements separately. A photograph showing two assemblies together does not establish the contents of the supplied package.

Compare Carrier and Sun Gear Interfaces
Carrier Dimensions and Arrangement

Check overall diameter, assembly height, central connection, pin arrangement, planet gear quantity and the positions of mating faces.

Provide front, rear and side photographs, with measurement units clearly stated. Measurements from removed components can help identify the configuration, but worn dimensions should not become acceptance tolerances for new parts.

Sun Gear Geometry and Connections

Identify the sun gear separately by tooth count, face width, tooth geometry, overall length and bore connection. For splined components, also confirm spline count, mating dimensions and engagement length.

Different components within one product listing may have different central connections. Label each photograph and measurement with the corresponding item so that first-stage information is not inadvertently used to specify a second-stage component.

Compare Quotations on the Same Supply Basis

A quotation described as “Carrier Assembly with Sun Gear” should confirm whether the sun gear is included. It should also identify the supply status of planet gears, pins, bearings, thrust washers and fasteners.

A bare carrier, an assembled single-stage unit and a package covering both stages represent different purchasing scopes. Align component names, quantities and assembly condition before comparing prices and delivery arrangements.

Distributors can request package labels showing the reference and confirmed stage. Workshops can request a packing list that corresponds directly to the repair requirement.

Define Inspection and Packing Requirements

The listing states that a machinery test report and outgoing inspection video are available. Confirm which components and inspection items those records cover.

Material grade, heat-treatment hardness, gear accuracy class and dimensional tolerances are not specified in the supplied information. Include these requirements in the enquiry where relevant and confirm the available inspection records.

The packaging presentation shows protective wrapping, foam supports and cartons. Confirm the actual packaging against the order quantity, component weight and transport arrangements, with separate identification and protection for each assembly.

For enquiries involving 22C0247, 40A0057, 71A0328 or 40A0056, provide the machine details, reducer identification, original references and required quantities so the component configuration and supply scope can be checked.